Check Your pH Levels
Testing your spa water’s pH levels is one of most important ways to determine its needs. After all, pH imbalances can make your hot tub water too acidic or too basic, both of which can have negative effects. Once you figure out your water’s pH level, you’re better equipped to know how much sanitizer to add.
Transcript:
What you’ll need
Test Strips
Jacuzzi® pH / Alkalinity Down
Measuring cup with ounces
Instructions:
Submerge the test strip six inches below the water line
Check your pH water results
The pH desired range is between 7.2 and 7.8
Turn on air blower or filter system
To lower your pH, utilize Jacuzzi pH / Alkalinity Down, one ounce per 400 gallons of water, Do not add more than 1 ounce at a time
Allow the water to circulate for 30 minutes
Retest and repeat the previous steps if needed